014-1064-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Pneumatische vetpompen breather valve and adaptor

breather valve and adaptor

Pump suction is assisted

The tank of dump with supporting structure is suitable to support the equipment for the distribution of lubricants for different uses (industrial environment or repair shops)

It pushing the grease into the pump and avoids air cavities

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

014-1064-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Pneumatische vetpompen breather valve and adaptorIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.